Table of Contents
Advertisement
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
FACTORY DEFAULTS
This function allows the operator to erase all of the
previously entered recipes and ad messages. Factory-
set default values will replace all previous settings.
Procedure to set factory defaults:
1. Press and hold the ® pad until WARMER OFF
appears. Release the ® pad. Press and release ®
until the display reads FACTORY DEFAULTS.
2. Pressing NO in this screen will revert to the MAIN
SCREEN. Press YES to replace the defaults. This
advances to WILL REPLACE ALL BREWING SET-
TINGS. This screen will alternate with ARE YOU
SURE?.
3. Pressing NO in the confirmation screen will revert
to MAIN SCREEN, without resetting the brewing
setups to the defaults. Press YES to load the
defaults. This will then revert to the MAIN SCREEN,
and the factory default values will replace all
previously entered values. It will NOT reset the
summation Brew counter.
Brew Lockout
DEFAULT (NO NAME) SETTINGS:
Iced Coffee
BREW VOLUME
DILUTION VOLUME
PULSE BREW TIME
PREINFUSION TIME
DRIP OUT TIME
Hot Coffee
BREW VOLUMES
DILUTION VOLUMES
PULSE BREW TIMES
PREINFUSION TIMES
DRIP OUT TIMES
Iced Tea
P2312
BREW VOLUMES
DILUTION PERCENTAGE
PULSE BREW TIMES
PREINFUSION TIMES
DRIP OUT TIMES
ENABLE ADS
BREW TEMPERATURE
READY TEMPERATURE
REFILL
SPRAY (Ml/MINUTE)
DILUTE (Ml/MINUTE)
FUNNEL LOCKOUT
UNITS
Page 38
FACTORY DEFAULT VALUES
1800 mL
0 mL
None
1st 0:53,OFF 0:45
1:00
Half Batch
900 mL
0 mL
None
1st 0:15,Off 1:00
0:30
2800 mL
53%
None
None
0:45
NO
Full Batch
1800 mL
0 mL
None
None
0:45
YES
93˚C (200˚F)
91˚C (195˚F)
155
1160
730
NO
METRIC
37467 110904
Advertisement
Table of Contents
