Table of Contents
Advertisement
LA-RAK
TOURING RACK
user manual
VERSION 2.0
9.2.2
LA-POWER US mono-phase circuits
Connect LA-RAK US to AC mains only if the operating voltage indicated on the LA8 back panels
corresponds to the local AC mains rating.
Two LA8 versions are available (also refer to the LA8 User Manual [3.4]):
VOLTAGE
A universal 120/230 V (±10 %) version fitted with automatic switch mode power supply.
A specific 100 V (±10 %) version for Japan.
The LA-POWER US three-phase circuit powers the three mono-phase circuits corresponding to the three L5-30
female outlets located on the rear face (L1, L2, and L3). These last allow connection of the three LA8 amplified
controllers mounted in the LA-RAK US (see Figure 39).
Each outlet is protected by a 30 A circuit breaker located on the front face and three LED help monitor the presence
of each phase on the front end of the mains circuit.
The LA-POWER US also includes an auxiliary circuit protected by the "Aux" 20 A circuit breaker. This circuit powers
six duplex outlets located on the front and rear faces to connect portable computer and the like as well as additional
Ethernet
®
switches.
LA8 power cords
L5-30 outlets (L1, L2, and L3)
Figure 39: Powering three LA8 within an LA-RAK (LA-POWER external rear view)
LARAK_UM_EN_2.0
w w w . l - a c o u s t i c s . c o m
44
Advertisement
Table of Contents
