L-Acoustics LA-RAK User Manual page 23

6.4.2 Flying procedure using the LA-RAK BUMP
The L-ACOUSTICS ® LA-RAK BUMP flying frame is engineered to fly 4 LA-RAK for a drive capacity of up to 24 K1
enclosures. It can be flown using single pick-point and secured to an additional safety point. It is assembled with bolts
for mechanical integrity visual check and is protected by polyester-coating to enhance weather resistance.
Rigging rail (x2)
All along the procedure:

Strictly follow the sequence of the successive steps.

Systematically ensure that each spring-loaded safety is in locking position and that screw pin is
WARNING
correctly secured on each shackle anchor.
1.
Bring a first LA-RAK under the rigging point.
2. Remove both coupling bars:
a. Turn a spring-loaded safety and slide the
coupling bar out.
b. Repeat for the second coupling bar.
LARAK_UM_EN_2.0
Figure 13: The LA-RAK BUMP
a.
Figure 14: Removing coupling bars from LA-RAK
w w w . l - a c o u s t i c s . c o m
Shackle for pick point
Safety point
Bolt
Stacking runner (x4)
a.
b.
b.
21