Table of Contents
Advertisement
5.5
LA-PANEL
The L-ACOUSTICS
®
LA-PANEL allows distribution of 6 analog audio signals. The LA-RAK is fed with the signals
through the SIGNAL INPUT 19-point PA-COM
6 OUT XLR3 connectors on the rear side of the panel. The SIGNAL OUTPUT 19-point PA-COM
sending the 6 signals to another LA-RAK in a daisy-chain layout. The PA-COM
®
the L-ACOUSTICS
cabling standard (DOM2, DOM30, DOMF, and DOMM cables).
The panel also features 4 Ethercon
network (for future applications).
Strain relief protection plate for network I/O
(for internal network cabling)
5.6
LA-PANEL AES3
®
The L-ACOUSTICS
LA-PANEL AES3 allows distribution of 6 digital audio signals. The LA-RAK is fed with AES/EBU
signals through 3 IN XLR3 connectors, each of them receiving 1 digital signal conveying 2 audio channels. The signals
can be distributed to the 3 amplifiers thanks to 3 OUT XLR3 cables integrated on the rear side of the panel. In order to
set a daisy-chain layout, the 3 LINK XLR3 cables allow routing pairs of channels from the LINK connector of the
amplifiers to the corresponding LINK XLR3 connector on the front side of the LA-PANEL AES3.
Also are provided 2 extra XLR cables, to connect LINK and IN connectors on the front of the panel. This operation
allows setting a daisy-chain between controllers within the LA-RAK (see [6.7]).
REAR
FRONT
(for external AES/EBU digital audio cabling)
LARAK_UM_EN_2.0
®
connector. The signals can be distributed to the 3 amplifiers thanks to
I/O sockets for L-NET control & monitoring network and L-DGA digital audio
®
Internal network cable (x4)
RJ45 sockets
19-point PA-COM
®
connectors
(for external analog audio cabling)
Figure 7: The LA-PANEL
XLR3 connectors
Figure 8: The LA-PANEL AES3
w w w . l - a c o u s t i c s . c o m
®
connectors ensure compatibility with
XLR3 connectors
(for internal analog audio cabling)
Ethercon
(for external network cabling)
XLR3 cables
(for internal AES/EBU digital audio cabling)
®
connector allows
®
sockets
15
Advertisement
Table of Contents
