Table of Contents
Advertisement
LA-RAK
TOURING RACK
user manual
VERSION 2.0
3.
Install the LA-RAK BUMP on the LA-RAK: align
the rails and set the stacking runners into the
runner guides.
Respect the orientation
indicated beside the LA-RAK
FRONT label.
WARNING
4.
Secure the LA-RAK BUMP to the LA-RAK (use
both preceding coupling bars):
a.
Turn a spring-loaded safety and slide in the
coupling bar along the rails until the safety
has returned to locking position (a click is
heard).
b.
Repeat for the second coupling bar.
5.
Attach the motor hook to the "PICK POINT"
shackle.
6.
Raise the LA-RAK BUMP/LA-RAK assembly at 0.7 m/2 ft height: the dolly board should separate from the array.
7.
Bring a second LA-RAK under the rigging point.
8.
Remove both coupling bars by repeating step 2.
9.
Lower the first LA-RAK so as to set it on the second one: align the rails and set the stacking runners into the
runner guides.
10. Secure the first LA-RAK to the second one (use both preceding coupling bars):
a.
Turn a spring-loaded safety and slide the coupling bar in along the rails until the safety has returned to
locking position (a click should be heard).
b.
Repeat for the second coupling bar.
LARAK_UM_EN_2.0
b.
Figure 15: Attaching LA-RAK BUMP to LA-RAK
w w w . l - a c o u s t i c s . c o m
b.
''PICK POINT''
shackle
''SAFETY''
point
a.
22
Advertisement
Table of Contents
