Rigging The La-Rak - L-Acoustics LA-RAK User Manual

LA-RAK
TOURING RACK
user manual
VERSION 2.0
6.4

Rigging the LA-RAK

The LA-RAK features four fully integrated rigging rails on top and bottom faces as well as four stacking runners which
mate with four runner guides. These are for assembling several LA-RAK in stacked or flown configurations such as:
 Stacking a vertical array of up to 3 LA-RAK onto one dolly board;
 Flying a vertical array of up to 4 LA-RAK underneath the L-ACOUSTICS
or onto the L-ACOUSTICS
6.4.1 Stacking procedure
All along the procedure:

Strictly follow the sequence of the successive steps.
 Systematically ensure that each spring-loaded safety is in locking position.
WARNING
1. Bring a first LA-RAK at the stacking location.
2. Bring a second LA-RAK and remove its dolly board:
a. Turn a spring-loaded safety and slide out the coupling bar.
b. Repeat for the second coupling bar.
a.
3. Lift up the second LA-RAK and install it on the first one: align the rails and set the stacking runners into the runner
guides.
LARAK_UM_EN_2.0
® K1-BUMP flying frame.
a.
b.
Figure 10: Removing the dolly board from the LA-RAK
w w w . l - a c o u s t i c s . c o m
® LA-RAK BUMP flying frame
b.
18