APN, User name, and Password — settings for connecting to the
Internet via a SIM card. To nd out the settings of your cellular operator,
contact your provider's support service.
How to set or change APN settings in the hub
Mobile data usage
Incoming — the amount of data received by the hub. Displayed in KB or
MB.
Outgoing — the amount of data sent by the hub. Displayed in KB or MB.
Keep in mind that data is counting on the hub and may differ from your operator's
statistics.
Reset statistics — resets statistics on incoming and outgoing tra c.
Check balance
USSD code — enter the code that is used to check the balance in this
eld. For example, *111#. After that, click Check balance to send a
request. The result will be displayed under the button.
Geofence — con guring reminders for arming/disarming the security
system when crossing a speci ed area. The user location is determined
using the smartphone GPS module.
What geofences are and how they function
Groups — group mode con guration. This allows you to:
Need help?
Do you have a question about the Hub Plus and is the answer not in the manual?