Lincoln 85250 Owner's/Operator's Manual

It is the responsibility of the Owner/Operator to properly use and maintain this equipment.
The Instructions and Warnings contained in this manual shall be read and understood by the Owner/Operator prior to operating
this equipment.
It is the responsibility of the Owner/Operator to maintain the legibility of all Warning and Instruction labels.
The Owner/Operator shall retain this manual for future reference to important Warnings. Operating and Maintenance
Instructions.
DO NOT exceed the stated maximum working pressure of
the
elector or of the lowest rated component in your system.
DO NOT alter or modify any part of this equipment.
DO NOT operate this equipment with combustible gas.
DO NOT attempt to repair or disassemble the equipment
while the system is pressurized.
TIGHTEN all fluid connections securely before using this
equipment.
ALWAYS read and follow the fluid manufacturer's
recommendations regarding fluid compatibility, and the use
of protective clothing and equipment.
CHECK all equipment regularly and repair or replace
worn or damaged parts immediately.
IMPORTANT: Failure to heed these warnings including
misuse, over pressurizing, modifying parts, using
incompatible chemicals and fluids, or using worn or
damaged parts, may result in equipment damage and/or
serious personal injury, fire, explosion, or property damage.
Model 85250: Used with EPDM Compatible Materials.
©
Model 85252: Used Specifically with Petroleum Based
Materials.
© Indicates change
SEPT - 2011
OWNER/OPERATOR MANUAL
One Lincoln Way
St. Louis Missouri 63120-1578
(314) 579-4200
Models No. 85250 & 85252
AIR OPERATED EJECTOR
Copyright 2011
Printed in USA.
- F40
Section
- 31C
Page
Form 404308