Lincoln Quicklub SSV Owner's Manual
Lincoln Quicklub SSV Owner's Manual

Lincoln Quicklub SSV Owner's Manual

Progressive metering devices for grease and oil
Hide thumbs Also See for Quicklub SSV:

Advertisement

Quick Links

Owner Manual
Operating Instructions
2.2A-10001-G07
Quicklub - Progressive Metering Devices
for Grease and Oil
Model SSV and SSV M, Planning and Layout
of Progressive Centralized Lubrication Systems
4328a01
LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Quicklub SSV and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Lincoln Quicklub SSV

  • Page 1 Quicklub - Progressive Metering Devices for Grease and Oil Model SSV and SSV M, Planning and Layout of Progressive Centralized Lubrication Systems 4328a01 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 2 Subject to modifications without prior notification. © 2007 by LINCOLN GmbH Postfach 1263 Phone: +49 (6227) 33-0 D-69183 Walldorf Fax: +49 (6227) 33-259 Page 2 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 3: Table Of Contents

    The model designation of the printed-circuit board is part of the pump model designation indicated on the pump nameplate. Example: P 203 - 2XN - 1K6 - 24 - 1A1.10 - V10 Page 3 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 4: Introduction

    / system. Therefore, for the operation of your device always use original spare parts made by 1013A94 Lincoln GmbH. Page 4 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 5: Safety Instructions

    1013A94 For applications in corrosive environments, use metering devices in stainless steel version only. Page 5 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 6: Installation

    Check valve with knurled collet 1a - reinforced collet 1009a98 2a - knurled collet Fig. 3 The different types of check valve Page 6 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 7: Tube Fittings, Screw-Type

    00002632 Fig. 6 Push-in type fitting with protection cap Page 7 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 8: Pressure Plastic Tubes And High-Pressure Hoses

    Preassembly of the threaded sleeve by means of an ad- justing gauge Threaded sleeve High-pressure hose Ø 4.1 x 2.3 mm Adjusting gauge 432-23077-1 Page 8 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 9: Description

    - no lubrication point which is connected to the system is omitted. 10002710 Fig. 10 Sectional view of a SSV 8 metering device Page 9 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 10 Max. differential pressure between two outlets....40 bar Outlet connection for tube..........Ø 4 mm 4330a01 Fig. 11 Differences between SSV M and SSV Page 10 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 11: Operation

    Hand-operated filling pump Fig. 13 Possible pump connections 4025a95 Fig. 14 Multiline pump expanded by a progressive metering device Page 11 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 12 Two-line system expanded by a progressive metering device 1206a95 Fig. 16 Single-line system expanded by a progressive metering device Page 12 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 13: Lubricant Distribution Within The Metering Device

    Lubricant under pump pressure Lubricant under delivery pressure of the piston Lubricant, pressureless 2008a95 Fig. 18 Phase 2 Page 13 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 14: Phase 3 - 5

    Lubricant under pump pressure Lubricant under delivery pressure of the piston Lubricant, pressureless 2011a95 Fig. 21 Phase 5 Page 14 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 15: Monitoring Of The Operation

    Indicator pin installed on metering device Components of the control pin tube fitting Closure plug M 11x1x5 MS, assy. (pos. 1) ..519-32123-1 Page 15 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 16: Electrical Monitoring (Microprocessor Control)

    6001a02 structure of the metering device. 4092a97 Fig. 25 Pressure relief valve Page 16 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 17: Determining The Lubricant Output By Combining Outlets

    Page 17 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 18: Tube Fittings, Push-In-Type (Main Metering Device)

    (see 6001a02 Fig. 26, page 17) must also be equipped with check valves with reinforced collet. Page 18 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 19: Tube Fittings, Push-In-Type (Secondary Metering Devices)

    Refer to Clamping ring (brass) outlets 3 and 5 on Fig. 29. Page 19 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 20: Planning And Layout

    If possible, also combine the lubrication points according to their lubricant requirement. 1006a96 Fig. 32 Combining the lubrication points into groups Page 20 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 21 SSV22) must always be con- Fig. 35 Connecting the metering device to the lubrication points nected to a lubrication point. Page 21 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 22 Connect the outlets of the main metering device which are Fig. 38 Divided lubricant quantity not used to the pump via a return line R. Page 22 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 23 Adjustable pump element K7 ..0.04 - 0.18 cm³/stroke* ** 1001a96 Fig. 39 Dividing the lubricant quantity - Calculation example Page 23 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 24 The required quantity may be very different as a result of the above mentioned factors. Page 24 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 25 Fifth-wheel with 6 lubrication points 1018a96 13. Connecting a liftgate Fig. 42 Liftgate with 12 lubrication points 1020a96 Page 25 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 26 Progressive metering device (secondary) 1022a96 Lines to the secondary metering device Fig. 44 Using a quick coupling with integrated return line Page 26 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 27 Pressure loss, high pressure hose Pressure loss, secondary metering Pressure loss, lubricant feed line between main and secondary metering device device Page 27 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 28 It does not indicate the dynamic pumpability of the grease. The flow properties of greases of the same NLGI class may be very different. Page 28 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 29: Troubleshooting

    SSV 8 SSV 6 Pressure plastic tubes Secondary metering device SSV 12 High-pressure plastic hose Tab. 1 Troubleshooting Page 29 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 30 Check the time setting at the printed circuit boards. Refer to the corresponding setting in the respective “Operating Instructions”. Tab. 1 Troubleshooting, continuation Page 30 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 31: Technical Data

    - dry ................10 Nm Metering device type SSV M flange - oiled ................7,5 Nm Install metering device .............6 Nm Page 31 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 32: Dimensions

    Metering Devices Model SSV M 6 to SSV M 12 Model SSV Dimensions A in mm Model SSV Dimensions A in mm 48,5 71,5 Page 32 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 33: List Of Lubricants

    Retinax EPL 2 Li-12-OH-stearat -10 °C SHELL Retinax CSZ Li/Ca -35 °C WESTFALEN Gresalit ZSA 2 Li-12-OH-stearat -15 °C Page 33 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 34 -20 °C TOTAL Ceran WR2 Ca-complex -10 °C ZELLER & GMELIN Divinol Lithogrease G 421 Li-complex -15 °C Page 34 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 35 Lubriplate FGL 2 Al-complex -5°C TRIBOL MOLUB-ALLOY FoodProof 823-2 FM Al-complex -15 °C TRIBOL MOLUB-ALLOY 9830 high-temperature grease PTFE 0°C Page 35 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...
  • Page 36 Phone: (+65) 6588-0188 Printed in Germany Fax: (+1) 800 424 5359 Fax: (+65) 6588-3438 Web site: Email: sales@lincolnindustrial.com.sg www.lincolnindustrial.com Page 36 of 36 LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259...

This manual is also suitable for:

Quicklub ssv m

Table of Contents