Additional Functions; Browse Recorded Files In X-Npms; Export Device List; Upload Project File From Dcs To Pc - Honeywell X-618 Commissioning Manual

5 Additional Functions

This section describes special functions and operations of the X-618 Config software, such as
Browse Record Files, Upgrade firmware, Export Device List, Download Project File and Select
Language. This software also provides the function that the software language can be customized
as needed.

Browse Recorded Files in X-NPMS

Click the software menu" Tools --- > Browse Recorded Files in X-NPMS", the window is displayed
as shown below:
Select the X-NPMS device in the drop down, and click the query button, then all the record files in
the device are shown. Click the icon
export button to save the recorded files to the local disk.

Export Device List

This software provides device list exporting function. It supports that the all devices' data, including
device type and quantity, configured in the project file, can be exported to a *.xls form sheet file,
according to a prescribed list form.
Click software menu: "Tools --- > Export Device List", the Save window is displayed. Select the
directory path and enter the file name, and then click the "Save" button to export a device list.

Upload Project File from DCS to PC

Each DCS will automatically saves all configuration files of the system, audio files are excluded.
The user is able to upload project files from any DCS through the configuration software. Click
software menu: "Tools --- > Upload Project File from DCS to PC", the following window will be
displayed:
to play the record. Select recorded files and then click the
52