Honeywell X-618 Commissioning Manual page 44

Voice description means the word contents, which can be input directly and will be displayed in the
operation menu of X-NPMS. Click to select audio files. Every speech segment should include
some corresponding audio files, otherwise broadcast may occur error.

Synthesis
Synthesis rules, category and its corresponding speech included can be set in this window.
Category list shows the all speech types. Click to add new categories, and click to delete.
Name of category can be input directly. Select the front check box to enable the category in the X-
NPMS.
After selecting a category, the voice segments can be set. Each category can include 10 segments
at most, and each segment can have up to 255 optional audio files. Users can pick audio files to
synthesize a completed sentence. Audio files list displays all the configured files. Users can first
choose a category, and select segment number, then click required files and drag to voice
segments list.
Note that the segments should be continued and started from 1, otherwise software will display
error message when downloading configuration.
Choose one audio file, and click to delete.
Note:
When there are many X-NPMS devices in system, the relative contents of "Speech Synthesis"
such as "Languages", "Audio Files" and "Speech Category" can be shared at all X-NPMS devices.
Users can choose language type and speech category as required. Different languages will be
broadcasted according to the sequence in language list when there are multiple languages
enabled in speech synthesis.
5． Volume Setting
Volume zones is used to set the zones or groups which volume can be adjusted by X-NPMS.
Available Groups or Speaker Lines displays the groups or zones, of which volume can be adjusted.
Users choose one or more zones, then left click and drag it into below list. Click the icon and
can adjust the displaying order. Please note that zone volume and group volume will be
displayed in two interfaces in X-NPMS.
43