Honeywell X-618 Commissioning Manual page 47


Date & Time
"Date & Time" is used to view and manually update the device's date and time. Click on the Get
icon to get the device's date & time. Clicking on the update button will synchronize the devices'
date and time with the PC. If you check the "conform all devices date and time" it will synchronize
all devices on the system with the PC date and time.

Used Space
The storage status bar is shown at the bottom of the screen, which helps users to know the space
that current files take up. The maximum space is 500MB.

Audio Source Setting
The Audio Source Setting is mainly used to set the parameters for 5 audio sources which are sent
from the NRI to the Network. The setting contents include: enable/disable, source name, multi-
case IP and audio source. There are 5 audio sources through an Ethernet network, 4 inputs that
can connect to external audio sources, and 1 built-in audio source. The external audio source
interfaces have 2 types: auxiliary input and balance input.
Check the check box or not to enable/ disable the audio source.
Set the source name, so the correct audio source can be selected when the play task is set.
Use the drop-down menu to choose Auxiliary input, balance input, and the play list of the NRI.
The interface for the external audio sources need to be consistent with the configuration.
Note:
When the NRI audio source is enabled, the device will broadcast the input audio source to the
network continuously, except when the audio source is the emergency broadcast. To avoid a
network jam, It is recommended to keep the unused audio sources disabled.

Device Status Output
The general fault status of the system can be sent to a third-party system through the dry contact
outputs of the NRI, select a dry contact output port, and set it to be a general fault output in the
function list.
46