Project Explorer View - Honeywell X-618 Commissioning Manual

Project Explorer View

The project explorer view shows all devices and groups in the system. It is necessary to select the
devices to make the relevant configurations one by one.

Project Explorer
The Project explorer is shown in a tree like structure. The first level shows the project name,
the second level shows the groups, and the third level shows all the detailed devices. Just as
shown in Figure 5.
Figure 5 Project Explorer Structure

Device and Group
The devices may be classified into different groups according to different project structures
and building's characteristics. When signals are detected through dry contacts, the devices in
the same group will connect with each other and respond at the same time. Users can set the
group as Central Group. A device from the Central Group can execute broadcast operation on
the all the groups, however, the device from the local group can only operate on the device
from the same group. Similarly, the audio source from the Central Group can be played to all
groups, but the audio source from local group can be only played in the same group.
Broadcasts in the groups can be only valid in the same group, and the emergency broadcast
can't be played.

Right-click allows the users to add, delete or rename the devices and groups.
11