Honeywell X-618 Commissioning Manual page 43

3． Manually Broadcast
The zones and tasks can be set to be controlled by manually broadcast.
In above two lists, one list shows the zones and groups can be controlled by X-NPMS, another
shows the task list can be used in manually broadcast window. Choose zones in left upper window,
and left click to drag them to left bottom list. Each zone and group is corresponding to the buttons
in manually broadcast. Click
tasks in the right upper list, keep left clicking and drag them to Selected Tasks.
4． Speech Synthesis
Broadcast operation of speech synthesis can be conducted by X-NPMS. Relevant settings, such
as task setting and content setting should be configured before operation. Please refer to the
chapter task setting of X-NPMS for setting speech synthesis task. Content settings of speech
synthesis are languages, audio files and synthesis.

Languages
Use to set broadcast language, which is shown as follows:
Select the check box to enable the language. Click
Choose a language and click
broadcast order in X-NPMS. Click
NPMS can have different languages, but broadcast order is the same.

Audio Files
Users can set the basic elements for speech synthesis, which are speech segments. Speech
segments, including description and audio files can be added here.
or button to adjust their positions. Then choose some or all
can add new languages and input names.
can delete it. The order of the language in list is also the
and to adjust the order. In the same system, every X-
42