Table of Contents
Advertisement
2. Select Work with System Partitions.
|
|
3. Select Work with partition configuration.
|
4. Choose Select Console Resource on the logical partition.
|
5. Press F9 to Change capability filter.
6. Select Any Console.
|
7. To select the IOP that will support your intended console, do one of the following:
|
v If the adapter to be used for the intended console is under the same IOP as the previous console's
|
|
adapter, the console IOP is already correctly tagged. Go to step 8.
v If the adapter to be used for intended console is under a different IOP than the currently
|
configured console, place a 1 in front of the IOP to select it as the console IOP.
|
|
8. Verify an adapter for use as an optional alternate console.
|
v To verify the tagging for an alternate console, find the IOP with the twinaxial adapter that will be
used for the alternate console. It is properly tagged if you see a > (greater than) symbol on the
|
same line. If the > is not on this line, enter an option 2 in front of the IOP being selected as the
|
|
alternate console.
Note: The selection of an alternate console only pertains when twinaxial workstations are to be
|
|
the alternate console. The alternate console must be under a different IOP than the IOP
tagged for use by Operations Console. Operations Console cannot be used as an alternate
|
console. Do not tag the same IOP for the console and the alternate console.
|
|
9. Press F3 to exit to the DST main menu.
|
10. Select Work with DST environment.
11. Select System Devices (skip this step if using SST).
|
12. Select Console.
|
13. If you are currently using Operations Console local console on a network (LAN), select Operations
|
|
Console local console on a network (LAN) and follow these steps to deallocate the network adapter:
Note: If this resource will be used for the service tools server (iSeries Navigator connections) or you
|
|
plan to use the local console on a network (LAN) as a backup console then you won't need to
do the clear. If either of these choices is true, continue with step 13e.
|
a. Select Operations Console (LAN). The LAN adapter currently in use should be shown.
|
|
b. Press F11.
|
c. Press F6 to clear the configuration data.
|
d. Press F7 to store this new value.
e. Press F12 twice to exit this window.
|
f. Select Console.
|
14. Select Twinaxial.
|
|
15. Press F3 to return to the DST main menu.
The system is now configured for use by your intended console type.
|
If you do not plan to use Operations Console as a backup console, do not remove or move it or its
|
adapter at this time. You may need it to debug a problem.
|
The iSeries system value QAUTOCFG must be set to ON. Use one of the following to verify or set this
|
system value on the iSeries server:
|
|
v Use the WRKSYSVAL QAUTOCFG OS/400 command.
|
v During a manual IPL, in the IPL Options window, select Y for Set major system options. Then, for
Enable automatic configuration, select Y.
|
76
iSeries: iSeries Access for Windows Operations Console
Advertisement
Table of Contents
