Table of Contents
Advertisement
__ j. Click OK.
__ k. Click OK again.
11. To complete the setup:
a. Click Continue.
b. If you get a message that says that the PC does not have a network adapter installed, click
OK.
c. If you get a message that says that Remote Access Service has been successfully installed,
click OK.
This message does not appear for all installations.
d. Click Close.
e. Click Yes to restart.
12. Continue with Install Microsoft service pack.
Install Microsoft service pack
Anytime Remote Access Service is either installed or reinstalled, you need to install Windows NT Service
Pack 6 (minimum level) before attempting to use Operations Console.
If you need a service pack and have Internet capabilities, download the latest Service Pack from
http://www.microsoft.com
Grant remote access
You will need to grant remote access for a remote console to have access to the local console:
Grant remote access for Windows NT
Use these instructions to grant remote access if you are running Windows NT.
Grant remote access for Windows 2000
Use these instructions to grant remote access if you are running Windows 2000.
Grant remote access for Windows XP
Use these instructions to grant remote access if you are running Windows XP.
Grant remote access for Windows NT: To grant remote access using the Windows NT User Manager:
1. Click Start
2. Select Programs.
3. Select Administration Tools.
4. Select User Manager.
5. In User Manager, select New User from the User menu and enter the user name and password
information, or double-click the desired user if it is already defined.
6. On the User Properties dialog, click Dial-In.
7. Select Grant dial-in permission to user.
8. Click OK twice.
Grant remote access for Windows 2000: To grant remote access using the Windows 2000 Incoming
Connections:
1. Click Start.
2. Select Settings.
3. Select Control Panel.
4. Select Network and Dial-up Connections.
. Otherwise, contact Microsoft for the latest update.
41
Operations Console
Advertisement
Table of Contents
