Table of Contents
Advertisement
__ 1. Meet Operations Console hardware requirements.
__ 2. Meet Operations Console software requirements.
__ 3. Meet Operations Console cable requirements.
__ 4. Verify available communications port.
__ 5. Run prerequisite checking program on the PC.
__ 6. Install iSeries Access for Windows.
__ 7. Apply iSeries Access for Windows service packs.
__ 8. Install AS/400 Operations Console Connection Modem.
__ 9. Install PC modem.
__ 10. Create and configure incoming connections.
__ 11. Grant remote access.
__ 12. Install Operations Console cables.
__ 13. Configure Operations Console on the PC.
Set up a local console on a network
There are unique setup prerequisites depending on the operating system you are using. Select the
operating system on which you are installing Operations Console on:
Complete prerequisite checklist for Windows NT
Complete the prerequisite checklist for a local console on a network running Windows NT.
Complete prerequisite checklist for Windows 2000
Complete the prerequisite checklist for a local console on a network running Windows 2000.
Complete prerequisite checklist for Windows XP
Complete the prerequisite checklist for a local console on a network running Windows XP.
Complete prerequisite checklist for Windows NT: Local console on a network: Complete the following
checklist to set up a local console on a network on Windows NT:
__ 1. Meet Operations Console hardware requirements.
__ 2. Meet Operations Console software requirements.
__ 3. Install iSeries Access for Windows.
__ 4. Apply iSeries Access for Windows service packs.
__ 5. Run prerequisite checking program on the PC.
__ 6. Configure a service host name (interface name) on the server.
__ 7. Create service tools device IDs on the server.
__ 8. Confirm installation of TCP/IP on the PC.
__ 9. Configure Operations Console on the PC.
Complete prerequisite checklist for Windows 2000: Local console on a network: Complete the
following checklist to set up a local console on a network on Windows 2000:
__ 1. Meet Operations Console hardware requirements.
__ 2. Meet Operations Console software requirements.
__ 3. Install iSeries Access for Windows.
__ 4. Apply iSeries Access for Windows service packs.
__ 5. Run prerequisite checking program on the PC.
__ 6. Configure a service host name (interface name) on the server.
__ 7. Create service tools device IDs on the server.
__ 8. Configure Operations Console on the PC.
31
Operations Console
Advertisement
Table of Contents
