IBM eServer iSeries Manual page 36

Access for windows operations console
Hide thumbs Also See for eServer iSeries:
Table of Contents

Advertisement

Complete prerequisite checklist for Windows 2000
Complete the prerequisite checklist for a local console directly attached to the server with remote
access allowed running Windows 2000.
Complete prerequisite checklist for Windows XP
Complete the prerequisite checklist for a local console directly attached to the server with remote
access allowed running Windows XP.
Note: The local console must be running Windows NT, Windows 2000, or Windows XP.
Complete prerequisite checklist for Windows NT: Local console directly attached to the server with
remote access allowed: Complete the following checklist to set up a local console directly attached to
the server with remote access allowed on Windows NT:
__ 1. Meet Operations Console hardware requirements.
__ 2. Meet Operations Console software requirements.
__ 3. Meet Operations Console cable requirements.
__ 4. Verify available communications port.
__ 5. Run prerequisite checking program on the PC.
__ 6. Install iSeries Access for Windows.
__ 7. Apply iSeries Access for Windows service packs.
__ 8. Confirm installation of TCP/IP on the PC.
__ 9. Install AS/400 Operations Console Connection Modem.
__ 10. Install PC modem.
__ 11. Install or configure Remote Access Service.
__ 12. Install Microsoft service pack.
__ 13. Granting remote access.
__ 14. Install Operations Console cables.
__ 15. Configure Operations Console on the PC.
Complete prerequisite checklist for Windows 2000: Local console directly attached to the server with
remote access allowed: Complete the following checklist to set up a local console directly attached to
the server with remote access allowed on Windows 2000:
__ 1. Meet Operations Console hardware requirements.
__ 2. Meet Operations Console software requirements.
__ 3. Meet Operations Console cable requirements.
__ 4. Verify available communications port.
__ 5. Run prerequisite checking program on the PC.
__ 6. Install iSeries Access for Windows.
__ 7. Apply iSeries Access for Windows service packs.
__ 8. Install AS/400Operations Console Connection Modem.
__ 9. Install PC modem.
__ 10. Create and configure incoming connections.
__ 11. Grant remote access
__ 12. Install Operations Console cables.
__ 13. Configure Operations Console on the PC.
Complete prerequisite checklist for Windows XP: Local console directly attached to the server with
remote access allowed: Complete the following checklist to set up a local console directly attached to
the server with remote access allowed on Windows XP:
30
iSeries: iSeries Access for Windows Operations Console

Advertisement

Table of Contents
loading

Table of Contents