Configuring The Telegram - Siemens SINAMICS G120X Manual

2 Configuring the hardware
2.4

Configuring the telegram

Procedure
1. Select standard telegram 20, relevant for communication, and drag & drop it
into the corresponding slot (1.3).
"PROFINET IO > Drives > GSD > SINAMICS G120X PN V1.0 > DRIVE >
Standard telegram 20, PZD-2/6"
Figure 2-4
2. Select the line with the input addresses and open the object properties with the
right mouse button.
3. Switch to the "Addresses" tab and assign the desired input and output
addresses; then assign the process image partition for each.
Figure 2-5
4. Confirm with "OK".
Note Remember that the channel block that will be used later must be integrated in
the same process image partition (OB3x) as the corresponding hardware.
Integration of a SINAMICS G120X frequency converter in PCS 7
Entry ID: 109793986, V1.0, 09/2021
9