Notes On Using The Remote Control Unit - JVC AV-P1000U Operating Instructions Manual

!
ZOOM PRESET (p. 10)
● 2 frequently used picture sizes can be stored in memory.
● Adjust the picture size as required and store it in memory by pressing the PRESET 1 or 2 button for more than 2 seconds.
● To recall the stored picture, press the PRESET 1 or 2 button.
@
MENU
#
● Use for ON-SCREEN ADJUSTMENTS (p. 14).
$
POINTER
%
● Press to show the pointer on the display. The pointer can be moved according to the direction of the arrows. Hold the buttons pressed to
increase the speed of the pointer movement.
* With the ON-SCREEN ADJUSTMENTS, the pointer shape and color can be set (p. 14 and 15).

Notes on using the remote control unit

● Applicable light reception range of the remote control unit
● When direct sunlight or powerful illumination (inverter fluorescent light, flash light, etc.) hits the
remote control light reception section, the remote control may not work properly. In this case, change
the direction of this unit or the illumination.
● When there is a person or an object between the remote control and the light reception section,
signal reception may not be possible.
● If the remote control is dropped or a violent shock is applied to it, the internal mechanism and
electronic parts may be damaged. Be careful when handling it.
● When the batteries are close to depletion, the operating range will be reduced. In this case, replace
the batteries with new ones.
● When changing the batteries, always replace both batteries with new ones. Do not use a new
battery together with an old one. Otherwise, a fire or injury may result due to explosion or leakage
of the battery.
● When the remote control is not used for a long period (more than one month), remove the batteries.
Otherwise, a fire or injury may result due to leakage of the battery.
● Do not charge, disassemble or heat a battery nor throw it into a fire. Otherwise, a fire or injury may
result due to explosion or leakage of the battery.
The applicable light reception range is a distance of approx.
7 m from the front axis of the remote control unit light recep-
Approx. 20˚
Approx. 7m
tion section and approx. 20˚ from the axis in the vertical and
Approx. 20˚ horizontal plane. Please use the unit within this range.
17