Storage - JVC AV-P1000U Operating Instructions Manual

STORAGE

1.
Press the power switch off and unplug the power cord and
video cables.
Note:
● When plugging and unplugging the power cord and
video cables, hold the plugs.
2.
Fold in the left and right side illumination arms in the direc-
1
tion shown (do not direct the side illumination lamps to-
wards the stage).
3.
Turn the camera head in the direction shown
4.
When moving the camera arm in the direction shown
press the lock release button
arm down in the direction shown
Notes:
● Do not release the camera arm when the lock release but-
ton is pressed in. Otherwise, a malfunction or injury may
result.
● When the camera arm is locked, do not apply excessive
force to it. Otherwise, a malfunction may occur.
● For storage, do not lean this unit against a wall, etc. If it
falls over, a malfunction or injury may result.
● For transportation, do not hold the unit by camera arm, side
illumination (lamp or arm), book holder, etc. This could apply
excessive force to the unit, resulting in a malfunction or
injury. Only use the carrying handle to lift the unit.
2
until it stops.
3
,
4
. Then, fold the camera
5
until it stops and lock it.
3
1
1
4
5
2
7