Function Description - JVC AV-P1000U Operating Instructions Manual

Dukane av-p1000u presenters: user guide
Table of Contents

Advertisement

Available languages

Available languages

Function description

Each function and set value for the ON-SCREEN ADJUSTMENTS are shown in the table below.
*1 *2
Items
AW SET : Allows automatic picture tone setting just by pressing the AUTO WHITE
WHITE BALANCE
MANUAL : Allows manual picture tone setting with the [RED LEVEL] and [BLUE LEVEL] options.
When [AW SET] is selected, use to fine adjust the red level for the auto white set.
RED LEVEL
When [MANUAL] is selected, use to adjust the red level.
*5
When [AW SET] is selected, use to fine adjust the blue level for the auto white set.
BLUE LEVEL
When [MANUAL] is selected, use to adjust the blue level.
*5
AUTO
IRIS MODE
MANUAL : Picture brightness is fixed.
When [AUTO] is selected, use to fine adjust the brightness.
IRIS LEVEL
When [MANUAL] is selected, use to adjust the brightness.
*5
When ON is selected, characters are clearer and sharper. Effective when this is
TEXT MODE
used to show text-only documents.
Use to reverse the image when presenting e.g. a film negative.
NEGA/POSI
Use to show a picture in black and white. When this is used to show a black-and-
BW/COLOR
white document, the picture will be clearer.
Use to obtain maximum magnification when the digital zoom function is used.
DIGITAL ZOOM
Use to set the picture size to be called with the ZOOM PRESET buttons. Different
ZOOM PRESET 1
sizes can be set for 1 and 2.
ZOOM PRESET 2
Set this function to USER to save the specified size by pressing the ZOOM PRESET
1 or 2 for more than 2 seconds.
Use to adjust video contours. The picture gets sharper as the setting increases from
DETAIL*3
-10 to +10.
Use to adjust the black level of the picture. Black areas in the picture become
BLACK LEVEL
sharper as the setting increases from -10 to +10.
Use to select the desired on-screen pointer shape. The available shapes are
POINTER SHAPE
ARROW
Use to set the pointer color. Available colors are WHITE (Wh), YELLOW (Ye), CYAN
POINTER
(Cy), GREEN (G), MAGENTA (Mg), RED (R) and BLUE (B).
COLOR
Use to set the split mode.
SPLIT MODE
Hori. : Upper; Camera image, Lower; Still picture, Division ratio; 1:1
Verti. : Left; Camera image, Right; Still picture, Division ratio; 1:1
DEFAULT (Defa.) : Restores the initial values instead of the current conditions*4
LOAD
USER : Restores the values stored in the status memory instead of the current
When OK is selected and menu setting is complete, the current conditions* are
SAVE
stored in the status memory.
*1 The menu screen output to the RGB OUT connectors is shown on 2 pages.
*2 The menu screen output to the VIDEO OUT connector is shown on 4 pages.
*3 The higher the DETAIL set value, the more the noise.
*4 Current conditions means the current on-screen and front panel function settings. However, "DIGITAL ZOOM", "FREEZE", "PIC-
TURE MEMORY" and "POINTER" positions are not stored in memory. Thus, when current settings are restored, "DIGITAL ZOOM",
"FREEZE", "PICTURE MEMORY" and "POINTER" are set to OFF.
*5 When the picture is displayed on the screen, the colors vary conversely to each of the set values of the "NEGA" mode. This
phenomenon occurs because of the characteristics of the RED, BLUE and IRIS.
Notes:
● When the C of the SYNC. switch is set to 0, the on-screen signals are not output to the RGB OUT connectors (p. 5).
● While the on-screen display is available, the "IRIS", "PC", "FREEZE", "VIDEO OUT", "DIGITAL ZOOM", "ZOOM PRESET" and
"PICTURE MEMORY" buttons have no effect. The pointer is not shown on the screen.
● When the power is turned on, the settings stored in the status memory are recalled. "DIGITAL ZOOM", "FREEZE", "PICTURE
MEMORY" and "POINTER" are set to OFF. If no data is stored in the status memory, the default settings are used.
Function description
SET button.
: When the ambient brightness changes, picture brightness is automatically
adjusted.
, CROSS
and PEN
.
when ending the menu.
conditions*4 when ending the menu.
Store settings Default value
AW SET,
AW SET
MANUAL
-10 to +10 (1-step)
0
-30 to +30 (1-step)
0
-10 to +10 (1-step)
0
-30 to +30 (1-step)
0
AUTO,
AUTO
MANUAL
-10 to +10 (1-step)
0
-30 to +30 (1-step)
0
OFF, ON
OFF
POSI, NEGA
POSI
COLOR, B/W COLOR
X2, X3, X4
X4
USER, A4/LTR,
A4/LTR
A5/6 x 8, A6/4 x 6,
A6/4 x 6
A7/3 x 4, SLIDE
-10 to +10 (1-step)
0
-10 to +10 (1-step)
0
ARROW,
ARROW
CROSS, PEN
WHITE, YELLOW,
WHITE
CYAN, GREEN,
MAGENTA, RED, BLUE
OFF, Hori.,
OFF
Verti.
CANCEL,
CANCEL
DEFAULT,
USER
CANCEL,
CANCEL
OK
15

Advertisement

Table of Contents
loading

Table of Contents