Operating The Remote Control Unit - JVC AV-P960E Instructions Manual

Operating the Remote Control Unit

The following functions are available with the use of the remote control unit.
CAMERA FREEZE
SD CARD
AUTO BRIGHT
AUTO FOCUS
AUTO OUT
WHITE
5m
EXT-IN
IMAGE SEL.
IN
ZOOM
*For details on the various functions, refer to page 6.
Up down ± 15˚
Left right ± 30˚
[CAMERA]
To output the camera images.
(☞ Page 6 [SOURCE SELECT] Buttons)
[FREEZE]
To make the camera image still.
(☞ Page 6 [FREEZE] Button)
[EXT-IN]
The images of the device connected to the [EXT INPUT] terminal
will be outputted.
(☞ Page 6 [SOURCE SELECT] Buttons)
[SD CARD]
To perform functions related to SD card.
● While displaying images from other sources, SD selection mode
will be activated if this button is pressed.
(☞ Page 6 [SOURCE SELECT] Buttons)
[BRIGHT]
To adjust the brightness of the camera image.
(☞ Page 6 [BRIGHT] Adjustment Buttons)
[FOCUS]
To adjust the focus of the camera image.
(☞ Page 6 [FOCUS] Button)
[ZOOM]
To reduce or enlarge the camera image.
(☞ Page 6 [ZOOM] Adjustment Buttons)
[AUTO WHITE]
To adjust the white balance automatically.
(☞ Page 7 [WHITE BALANCE] Adjustment Buttons)
Remote control receiving range
The receiving range is about 5m.
The vertical plane is ± 15˚ and the horizontal plane is ± 30˚.
E-23