Drawer Leds - Seagate OneStor SP-3584 Installation & User Manual

5.3.4 Drawer LEDs

Figure 5–4
Table 5–4
LED
Sideplane OK/Power
Good
Drawer Fault
Logical Fault
Cable Fault
Activity Bar Graph
Drawer LEDs
Drawer LED Descriptions
Description
Green if the sideplane card is working and there are no power problems.
Amber if a drawer component has failed. If it is a drive that has failed, an
amber LED will be lit on the failed drive and you should follow the
procedure in section
page 46 to replace the drive. If the drives are OK, contact your storage
vendor to identify the failure.
Amber if there is a drive fault. Flashes amber if one or more arrays are in an
impacted state.
Amber if the cabling between the drawer and the back of the enclosure has
failed. Contact your storage vendor to resolve the problem.
Shows the amount of data I/O from zero segments lit (no I/O) to all six
segments lit (maximum I/O).
6.3, "Replacing a Disk Drive in Carrier (DDIC)", on
Troubleshooting
37