Adjusting The Shoulder Belts - CYBEX ATON User Manual

11

ADJUSTING THE SHOULDER BELTS

NOTE! Only if the shoulder belts
optimum security can be provided.
• When the baby is approximately 3 months the seat
insert can be removed to provide enough space for the
child (see page 26).
• The height of the shoulder belts
such a way that they run through the belt slots
above the baby's shoulders.
To adjust the height of the shoulder belts
the next steps:
• Press the red button to open the buckle e.
• Pull the shoulder pads
d
remove them.
• First pull one buckle tongue
of the belt slot s. Now insert it again through the next
higher slot. Repeat this step to the adjust the other side
as well.
NOTE! Please make sure that the shoulder belts
not twisted but should lie flat against the main seat, run
evenly through the belt slots
c are adjusted correctly
c must be adjusted in
s directly
c please follow
over the belt tongues t to
t through the cover and out
c are
and down to the buckle e.
s