How to Use
-Blender attachment-
Preparations
■ C ut soft ingredients into 2-3 cm
cubes.
Citrus
Apple
(
)
(
)
Peel and
Remove core and
separate.
peel skin if desired.
R emove pit from peaches, plums
●
and other stone fruits.
Notes
U se a container or a pan that can be used with the blender. Hold the
●
container firmly while in use.
Can use
Beaker
●
Metal or plastic
●
containers or pan.
Do not make contact
with the rim or the bottom of container
to avoid damaging it.
Do not use continuously for longer than 1 minute. (Cause of malfunction: P. EN9)
●
Follow the quantities that can be made in 1 batch.
●
Do not add ingredients that exceed the height
●
of the blender shaft.
When adding liquid, follow the chart to
●
the right.
Depending on the type and quantity of
●
ingredient, mixture may spill from the beaker or container. In such cases,
reduce the quantity.
D o not insert or remove the blender from the beaker, etc. while trigger
●
switch is pressed. (It may cause injury and/or burn.)
Attach blender attachment firmly. (P. EN8)
●
EN10
■ C ut hard
■ W ash leafy veg-
ingredients into
etables well and
1 cm cubes.
cut into 2-3 cm
width pieces.
Carrots, etc.
(Peel)
R emove the stem
●
(
)
end/root, then wash
If pieces are too
well before use.
big, they cannot
(Spinach, etc.)
be mixed well.
R emove large
●
stems from kale.
Cannot use
Glass containers
●
(Including heat
resistant and
strengthened glass.)
Ceramic and
●
earthenware containers and pots
that are easy to break.
Blender
Liquid level
shaft
mark
Preparation:
① Attach blender attachment to motor housing. (P. EN8)
② Insert power plug into the wall outlet.
③ Unlock child lock.
1
Insert blender into container.
2
Press trigger switch while
holding down unlock button
to start.
M ix while pushing blender blade into the
●
ingredients. (Do not push hard.)
Hold beaker firmly so it does not lift up.
●
I nsert blender directly downwards
●
when using beaker.
W hen ingredients sticks to the container
●
and is difficult to move, release trigger
switch and reapply to ingredients.
Then, restart again.
D o not lift blender blade above the surface of liquid ingredients while in
●
use. (Risk of splattering.)
W hen handling in a pot or bowl, swirl the liquid at a slanted 5-10 mm
●
without removing blender blade from the liquid. This will mix ingredients
more smoothly.
I f device stops during use, see P. EN14.
●
3
When finished, release trigger
switch and lock child lock.
Confirm that rotation has
stopped, then remove blender
from container.
T he blender can be placed on the protective
●
holder temporarily.
After Use
Unplug the power plug.
●
Remove blender attachment and clean them. (P. EN12-13)
●
Unlock child
lock
While holding down
the unlock button,
press the
trigger switch.
Lock child
lock
EN11