Safety Precautions
CAUTION
Make sure to hold the power plug when unplugging
●
it. Never pull on the power cord.
Beware not to be tripped over or get caught in the
●
power cord while in use.
Care shall be taken when handling the blender
●
blade, emptying beaker and during cleaning.
Do not clean the blades by bare hand. Use the
spatula brush provided.
Always disconnect the appliance from the supply
●
if it is left unattended and before assembling,
disassembling, moving or cleaning.
D o not allow children to use the appliance without
●
supervision.
Switch off the appliance and disconnect
●
from supply before changing attachments or
approaching parts that move in use.
Important Information
Do not use the appliance outdoors.
●
Do not use the appliance for commercial purpose.
●
Do not place the beaker on any heat sources or in a
●
microwave.
Do not drop the appliance to avoid damaging it.
●
Do not wrap the power cord around the motor housing.
●
Make sure the attachments are set firmly.
●
Do not use the appliance beyond the rated time.
●
Do not operate the appliance without ingredients.
●
EN6
Please make sure to follow
these instructions.
Part Names and Instructions
Motor housing
Control panel
Unlock button (
Press the
section.
●
Lock is released while the button is
●
pressed. (When the trigger switch
is pressed and rotation begins, the
lock will not engage even if your
finger is removed.)
Cannot be pressed when child lock
●
is locked.
Motor housing back
Trigger switch
Back
Press the trigger
●
switch while holding
down the unlock
button to start the
machine. (P. EN11)
The power will be
●
"On" only while
holding this switch.
Child lock
Be sure to lock
Lock
Unlock
in the following
instances;
taking a break
●
from blending.
carrying.
●
not in use.
●
attaching or removing attachments.
●
The unlock button cannot be pressed while
●
the child lock is locked.
Illustration may vary from actual product color.
●
Power
cord
section)
Power plug*
* The shape
of plug may
be different
from
illustration.
Blender attachment
Blender housing
Bottom
Blender
blade
Protective
holder
Use for placing or storing the
blender temporarily.
For safety, it is attached to the
blender at the time of purchase.
EN7