Baroness LM315GC Technical Information
Blade/cut adjustment procedure
Hide thumbs
Also See for LM315GC:
- Service manual (199 pages) ,
- Owner's operating manual (115 pages) ,
- Assembly and installation manual (19 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Baroness LM315GC
Summary of Contents for Baroness LM315GC
- Page 1 Technical Information Leaflet TIL: 034 LM315GC Blade/Cut Adjustment Procedure...
- Page 2 Before commencing any blade adjustments it is very important that the cutting units are thoroughly cleaned and dry. To check that the blades are cutting correctly use a strip of paper as shown. With the strip of paper held square to the bottom blade, rotate the cutting cylinder and see if the blades will cut the paper with minimal blade contact...
- Page 3 Please note that Baroness blades are designed to run non-contact and so do not over tighten them. If you are unable to achieve an acceptable cut with just a light contact after performing...
Need help?
Do you have a question about the LM315GC and is the answer not in the manual?
Questions and answers