Baroness LM315GC Technical Information
Setting the groomer height
Hide thumbs
Also See for LM315GC:
- Service manual (199 pages) ,
- Owner's operating manual (115 pages) ,
- Assembly and installation manual (19 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Baroness LM315GC
Summary of Contents for Baroness LM315GC
- Page 1 Technical Information Leaflet TIL: 038 LM315GC Setting the Groomer Height...
- Page 2 BARONESS LM315GC ATTACHMENT ADJUSTMENT The setting bar for the Baroness LM315GC has two adjusting screws which are used as follows: Height of Cut Setting Screw Groomer height setting screw. If no groomer is fitted then this screw is not used.
- Page 3 Before you can adjust the groomer you will need to make sure that the height of cut is set correctly. With the height of cut already set, fit the setting bar to the machine as shown so that the underside of the head of the height of cut adjusting screw is sitting on the upper cutting surface of the bottom blade and that ends of the setting bar are...
- Page 4 Now adjust the height of the attachment by rotating the Adjuster nut. Turning the adjuster nut clockwise will raise the attachment and turning it anti- clockwise will lower it. Adjust the attachment so that the tip of the blade or brush bristle is just touching the end of the pre-set adjuster screw as shown.
- Page 5 NOTE: Adjust all attachments (de-thatcher and brush) in the same way. The groomer blades should never come into contact with the soil and are only designed to run between the grass leaf. When adjusting the groomer blades always ensure that they at least 1.5mm above the roller line as shown.
Need help?
Do you have a question about the LM315GC and is the answer not in the manual?
Questions and answers