TABLE OF CONTENTS: ITEM PART NUMBER DESCRIPTION QTY. • Warnings: Page 3 5712201 WLDMT, CROSS SUPPORT • General Notes: Page 4 5712501 WLDMT, LEFT BASE 5713001 WLDMT, RIGHT BASE • Squat Stand Assembly: Page 5 - 9 2005816 BOLT, 1/2-13 X 4-1/4" (108mm) SOCKET HEAD •...
Children and pets must not be allowed near this machine. Supervise teenagers. This product is not a toy. • If unsure of proper use of this product, contact Torque Fitness Customer service at: 763-754-7533 (8:30 am - 5:00 pm CST). or 1-877-TORQUE5 (1-866-664- 9894). www.service@torquefitness.com Important Safety Instructions for Assembling Equipment •...
If any items are missing, page. To correctly measure the bolts, measure connections that should be securely tightened, contact Torque Fitness Customer service at: from underneath the bolt head to the end of the while secondary connections need to be loosen 763-754-7533 (8:30 am - 5:00 pm CST).
STEP 1 NOTE: LOOSELY tighten bolt connections in this step.
Page 6
STEP 2 NOTE: LOOSELY tighten bolt connections in this step.
Page 7
STEP 3 NOTE: LOOSELY tighten bolt connections in this step.
Page 8
STEP 4 NOTE: SECURELY tighten all bolts in this step and previous steps.
Page 9
STEP 5 INSERT BAR SUPPORTS INTO DESIRED SLOTS ON UPRIGHTS. PUSH DOWN TO LOCK IN PLACE NOTE: WARNING LABEL TO REMOVE BAR SUPPORTS FROM UPRIGHTS, PULL SPRING PIN OUT TO UNLOCK. LIFT UP AND PULL OUT...
STEP 6 (OPTIONAL SQUAT STAND CROSS) NOTE: SECURELY tighten all bolt connections in this step.
Page 11
STEP 7 (OPTIONAL VERTICAL WEIGHT STORAGE) NOTE: SECURELY tighten all bolt connections in this step.
Page 12
STEP 8 (OPTIONAL BAR CATCHES) INSERT BAR SUPPORTS INTO DESIRED SLOTS ON UPRIGHTS. PUSH DOWN TO LOCK IN PLACE NOTE: WARNING LABEL TO REMOVE BAR SUPPORTS FROM UPRIGHTS, PULL SPRING PIN OUT TO UNLOCK. LIFT UP AND PULL OUT...
Page 13
STEP 9 (OPTIONAL DIP ATTACHMENT) INSERT BAR SUPPORTS INTO DESIRED SLOTS ON UPRIGHTS. PUSH DOWN TO LOCK IN PLACE NOTE: WARNING LABEL TO REMOVE BAR SUPPORTS FROM UPRIGHTS, PULL SPRING PIN OUT TO UNLOCK. LIFT UP AND PULL OUT...
Page 14
STEP 10 (OPTIONAL GROUND ROTATIONAL TRAINER) NOTE: SECURELY tighten all bolt connections in this step.
Page 15
STEP 11 (OPTIONAL BATTLE ROPE ANCHOR) NOTE: SECURELY tighten all bolt connections in this step.
Page 16
STEP 12A AND 12B (OPTIONAL DOUBLE PLAY) LOOSEN AND REMOVE BOLTS, RE-USE BOLTS, WASHERS AND NUTS WASHERS AND NUTS FROM PREVIOUS STEP NOTE: SECURELY tighten all bolt connections in this step.
Tighten spring pin nuts as needed. • FRAME: Wipe down frame with a damp cloth. SPRING PIN WARNING LABEL Torque Fitness 11201 Xeon Street NW Ste 101 Coon Rapids, MN USA 55448 www.torquefitness.com Toll free: 1-877-TORQUE5 (1-866-664-9894) GENERAL WARNING LABEL or 763-754-7533 (8:30 am –...
Need help?
Do you have a question about the XGYM-LSR Series and is the answer not in the manual?
Questions and answers