Installation - Rexing V3 Basic Quick Start Manual

3. Installation

Step 1:
Install the Dash Cam
Place the 3M tape on the mount and properly orient the mount
square to the roof and hood line of the vehicle.
Firmly press the mount onto the windshield. Wait at least 20
minutes before mounting the camera.
Orient the mount as shown on the illustration above.
Step 2:
Insert the Memory Card
The Rexing V3 Basic accepts [Class 10/UHS-1 or higher]
Micro SD memory cards up to 256GB. You will need to insert
a memory card before you can begin recording. Before
inserting or removing a memory card,
you've powered down the device. Gently push the
memory card in until you hear a click, and allow the spring
release to push the card out.
8
Orient the
mount as shown
irst ensure