Table of Contents
Advertisement
Variable Shade Control
After turning on the lens, press the
"FUNC" button to choose "SHADE",
adjust the lens shade number. Use
the shade control UP and DOWN but-
tons to select the lens darkened
state.
The shade range for each mode is as
follows:
•
Weld Mode - No. 9 ~ No. 13
•
Cutting Mode - No. 5 ~ No. 8
•
Grind Mode - No. 4
Sensitivity Control
Press "FUNC" button to choose
"SENS". Use Sensitivity Control "UP"
and "DOWN" buttons to make the
lens more or less sensitive to arc light
for different welding processes. Sen-
sitivity settings 3 through 7 are the
normal settings for everyday use. The
sensitivity ranges for each mode are
as follows:
•
Weld Mode / Cutting Mode - No.
0 ~ No. 9
•
Grind Mode - No sensitivity
adjustment
It may be necessary to adjust goggle
sensitivity to accommodate different
lighting conditions or if the lens is flashing On and Off. Adjust the lens sensitivity
in lighting conditions the mask will be used in. Adjust mask sensitivity as follows:
•
Press the "DOWN" button to lower setting to 0.
•
Face the mask in the direction of use, exposing it to the surrounding light
conditions.
•
Press the "UP" button repeatedly until the lens darkens, then press the
"DOWN" button until the lens clears. The goggles are ready for use. Slight
readjustment may be necessary for certain applications or if the lens is
flashing on and off.
6
Advertisement
Table of Contents
