Table of Contents
Advertisement
Face Cover Replacement:
To install a new face cover, first snap the piece into the two hinges on either
side of the goggle shown in Step 1. For Step 2, rotate the face cover so that
it is flush with the goggle. Lastly, fasten the two screws attached to the face
cover into the goggle by turning them clockwise as shown in Step 3.
To remove the face cover, turn the screws counter-clockwise, rotate the
cover away from the goggle, and unsnap the cover from the two hinges on
the goggle.
Step 1
Step 2
Step 3
12
Advertisement
Table of Contents
