Installation - Ubiquiti GBE-LR Quick Start Manual

Flashing White
White
Blue
Steady Blue with
Occasional Flashing
Quickly Flashing Blue
Alternating
Blue/White
This Gigabit Ethernet port is used to connect the power and should be connected to
the LAN and DHCP server. Default IP address: 192.168.1.20.
To reset to factory defaults, press and hold the Reset button for more than 10
seconds while the device is powered on. Alternatively, the device may be reset
remotely via a Reset button located on the bottom of the Gigabit PoE Adapter.

Installation

Create PDF in your applications with the Pdfcrowd
Power/Status LED
PoE IN Port
Reset Button
HTML to PDF API
Bootup in progress.
Ready for use, not connected to Ubiquiti® Network
Management System (UNMS™). See
Management".
Ready for use, connected to UNMS.
Ready for use, unable to connect to UNMS, check
connection to UNMS server.
Used to locate a device in UNMS.
Firmware upgrade in progress.
"UNMS
PDFCROWD