Ubiquiti GBE-LR Quick Start Manual page 29

Repeat the instructions in the
UNMS Management
You can manage your device using UNMS, which lets you configure, monitor, upgrade,
and back up your devices using a single application. Get started at
Alignment
Tips
Establishing a Link
Adjust the aim of the AP and the Station to establish a link.
1.
Create PDF in your applications with the Pdfcrowd
To accurately align the radios for best performance, you MUST align only one end of
the link at a time.
You may need to use additional hardware to compensate for issues such as the
improper orientation of a mounting pole or significant elevation differences between
radios.
Note: The AP must be aimed first at the Station because the Station does not
transmit any RF signal until it detects transmissions from the AP.
AP Visually aim the AP at the Station by loosening the Flange Nuts on the Mounting
Bracket to allow adjustments to the azimuth and the elevation.
Adjust the azimuth:
HTML to PDF API
"Configuration" section on the other GigaBeam.
www.unms.com
PDFCROWD