Installation Requirements - Ubiquiti GBE-LR Quick Start Manual

Installation Requirements

Create PDF in your applications with the Pdfcrowd
Flat Washers (Qty. 2)
Gigabit PoE (24V, 0.5A) with
Mounting Bracket
Clear line of sight between GigaBeam AP and station
Vertical mounting orientation
Mounting point:
At least 1 m below the highest point on the structure
For tower installations, at least 3 m below the top of the tower
Outdoor, shielded Category 6 (or above) cabling and shielded RJ45 connectors are
required for all wired Ethernet connections.
Surge protection should be used for all outdoor installations. We recommend that
you use two Ethernet Surge Protectors, model ETH-SP-G2, one near the device and
the other at the entry point to the building. The ETH-SP-G2 will absorb power surges
and safely discharge them into the ground.
HTML to PDF API
Lock Washers (Qty. 2)
Power Cord
Flange Nuts (Qty. 2)
PDFCROWD