Installer Setting Code Table - LG MULTI V ARNU07GTUA4 Engineering Product Data Book

Indoor unit
2. Wall Mounted, ART COOL Gallery, ART COOL Mirror

Installer Setting Code Table

No. Function Function Code
0 Mode Override
Ceiling Height
1
Selection
Group Control
2
Auxiliary
heater
Group Control Setting
- This function is only for group control.
- Please don't set this function in case of non-group control.
- This function is the Master or Slave setting function of indoor unit
- Set only one indoor unit to Master, set the others to slave.
- After setting Group Control of the product, turn off the power then turn it back on after 1 minute.
- Master checking whether the buzzer sounds, such as indoor rings below.
▶ Master: "Beep" (Buzzer sound 1 time)
▶ Slave: "Beep, Beep, Beep, Beep, Beep " (Buzzer sounds 5 times)
8 _
Dip Switch & Group Control Setting
Setting Value
0 : Set to Master
0
1 : Set to Slave
1 : Standard
2 : Low
1
3 : High
4 : Super High
0 : Set to Master
2 1 : Set to Slave
2 : Check Master/Slave
3 : Set to Auxiliary heater
2
4 : Cancel Auxiliary heater
2 : Check Auxiliary heater Installation
Remote Controller LCD
00
01
11
12
13
14
20
21
22
23
24
25