Indoor unit
10. Installation
• Please read this instruction sheet completely before installing the product.
• When the power cord is damaged, replacement work shall be performed by authorized personnel only.
• Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
Installation Parts Provided
1. Installation Plate
2. Type "A" screws
3. Type "B" screws
Required Parts
o Installation plate
o Five type "A" screws
o Two type "B" screws
o Connecting cable
o Pipes: Gas side
Liquid side
o Insulation materials
o Additional drain pipe
Required Tools
o Level gauge
o Screw driver
o Electric drill
o Hole core drill
o Flaring tool set
o Specified torque wrenches
o Spanner......................................................Half union
o A glass of water
o Screw driver
o Thermometer
ARTCOOL (Mirror)
_ 23