Installation Of Decoration Panel(Grille Type) - LG MULTI V ARNU07GTUA4 Engineering Product Data Book

Indoor unit
10. Installation

10.5 Installation of Decoration Panel(Grille Type)

The decoration panel has its installation
direction.
1. Open the air outlet vane, and extract side covers.
2. Remove the air inlet grille from the decoration panel.
3. Hook decoration panel to indoor unit, using hooks attached at the backside of both side of decoration
panel.
4. Arrange wires not to get caught between decoration panel and indoor unit.
5. Screw 7 fixing screws. (7,9,12kBtu : 6 screws)
6. Connect the vane motor connector and display connector. (Plasma connector for plasma model)
7. Install the air inlet grille (including the air filter) and side covers.
Air conditioner unit
Plasma filter
(applied only to plasma model)
Decorative panel
Air inlet grille
CAUTION
Install certainly the
decoration panel.
Cool air leakage caus-
es sweating.
⇨ Waterdrops fall.
24 _
Ceiling Cassette 1-Way
Good example
Air conditioner
unit
Decorative panel
Fit the insulator (this part) and
be careful for cool air leakage
Before installing the decoration panel,
always remove the paper template.
Decorative panel
fixing screws
(hexagon M6 screws)
(tightening about 20mm)
Bad example
Cool air leakage
(no good)
Ceiling
board
Mesh
Control box cover
Side cover
Air inlet grille
Air conditioner
unit
Ceiling
board
Decorative panel