Master/Slave Setting - LG MULTI V ARNU07GTUA4 Engineering Product Data Book

Indoor unit
2. Wall Mounted, ART COOL Gallery, ART COOL Mirror

2.1 Master/Slave Setting

CAUTION
Installer setting mode is to set the detail function of the remote controller.
If the installer setting mode is not set correctly, it can cause problems to the product, user injury or property damage.
This must be set by an certificated installer, and any installation or change that is carried out by a non-certificated per-
son should be responsible for the results. In this case, free service cannot be provided.
1 When JET COOL button pressed, press RESET button
2 By using the TEMPERATURE SETTING button, set function code and
setting value. (Please refer the Installer Setting Code Table.)
Function Code
Setting Code
3 Press the ON/OFF button toward the indoor unit 1 time.
4 Reset the remote controller to use the general operation mode.
Dip Switch & Group Control Setting
_ 7