Installer Setting Code Table - LG BECON PQCSZ250S0 Installation Manual

Installation setup mode _ How to enter installer setup mode
! CAUTION
Installer setting mode is to set the detail function of the AC Ez.
If the installer setting mode is not set correctly, it can cause problems to the product, Injury
to user or property damage. This must be set by an certificated installer, and any installation
or change that is carried out by a non-certified, user should be responsible for the results.
In this case, free service cannot be provided.
1
If pressing
- If pressing once shortly, it doesn't enter into installer setup mode.
Please press more than 5 seconds for sure.
2
When you enter the setting mode initially, function code is displayed and on/off led of
indoor #1 is blinking.

Installer Setting Code Table

No. Function
1 Master/Slave Setting
Group 1 product Select
2
Group Number Setting
Group 2 product Select
3
Group No. Setting
Indoor units searching
4
(Master controller only)
5 °C / °F setting
button long for 5 seconds, it enters into AC Ez setup mode.
Code
M
1
Air conditioner / Ventilator
2
0~F : Group Address
Air conditioner / Ventilator
3
0~F : Group Address
4 Indoor unit searching
°C : Celsius
5
°F : Fahrenheit
INSTALLATION INSTRUCTION
Value
S
: Master : Slave
- : No use of this group
- : No use of this group
13