Epever MPPT Tracer1206AN User Manual page 26

Please set Light ON/OFF, Test mode, and Manual mode via Timer1. Timer2 will be
disabled and display "2 n ".
CAUTION
② Load mode setting

Load mode setting by PC software
Connect the controller's RJ45 interface to the PC's USB interface via a USB to RS485 cable (model:
CC-USB-RS485-150U). Set the load mode by the PC software. Refer to the cloud platform manual for
detail.

Load mode setting by APP
Connect the controller to the WIFI module through a standard network cable or connect to the Bluetooth
module by Bluetooth signal. Set the load mode by the APP. Refer to the cloud APP manual for details.

MT50 Setting
For detailed setting methods, please refer to the instructions or contact after-sales
support.
CAUTION
22