Epever MPPT Tracer1206AN User Manual page 19

Load
2） Error codes
Status
Battery
over-discharged
Battery over voltage
Battery overheating
Load failure
① When the load current reaches1.02-1.05 times, 1.05-1.25 times, 1.25-1.35 times, and 1.35-1.5 times
more than the rated value, the controller will automatically turn off the loads in 50 seconds, 30
seconds,10 seconds, and 2 seconds respectively.
3） Browse interface
Press the SELECT button to cycle display the following interfaces.
Battery Voltage, Current, Temperature
Current/Consumed energy/Load mode
Icon
Battery level shows empty, battery frame
blink, fault icon blink
Battery level shows full, battery frame
blink, fault icon blink
Battery level shows current value, battery
frame blink, fault icon blink
Overload
15
Battery type
Load ON
Load OFF
Instruction
①
, Load short circuit