Omcan MS-IT-0300-A Instruction Manual page 5

• Protection devices mounted on the product holder to prevent the operator from any accidental contact with
the blade.
• Blade guard. This fixed ring protects that part of the blade which is not used for the cutting operation.
• A special mechanical safety device to sharpen the blade keeping the fingers of the operator away from the
cutting edge of the blade.
ELECTRICAL SAFETY DEVICES
The electrical safety devices in accordance with the EN 60204 standards are the following:
• Start and stop push buttons.
• Control circuit provided with electric servo-control; in any case of blade clamping the machine must be
restarted manually.
• Safety device to stop the rotation of the blade if the clamping handle of the blade guard is released.
WARNING
When the machine is not used:
• Make sure that it is off.
• Re-position the slice thickness control to zero.
Do not remove the labels placed on the machine and replace them if damaged.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as
possible.
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classified as normal solid urban waste and can therefore be disposed of
without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
1 YEAR PARTS AND LABOUR WARRANTY
Safety and Warranty
5