Advertisement
Quick Links
Sec.
1.
BASIC DESCRIPTION
2.
INTRODUCTION
3.
DIMENSIONS
4.
INSTALLATION
4.1.
Placing the equipment
4.2.
Connection
4.3.
Supply
4.4.
Inputs
4.5.
Outlets
5.
CONFIGURATION
5.1.
Inputs
5.2.
Outlets
5.3.
Programming
6.
USE
6.1.
Programmes
6.2..
Curves
6.3.
Record
6.4.
Anomalies
6.5.
Various
6.6.
Consult
7.
DETAILED DESCRIPTION OF TYPES
8.
AMBITROL 100H
9.
AMBITROL 100HS
PRESENTATION
We wish to take this opportunity to thank you for
the confidence in us which you have shown in
expressing
interest
or
102/103.
This confidence, for our part, stimulates our
efforts to meet and surpass the expectations of our
clients to justify the traditional quality of our products.
This manual will explain the specification of the
equipment as well as its installation and use.
However, if after reading this you still have any
doubts, contact us and we will happily answer them.
INSTRUCTION
MANUAL
INDEX
Theme
adquiring
the
AMBITROL
MODELS 102 Y 103
1. BASIC DESCRIPTION
Page
1
2
electronic system for the automatic control of the
4
environmental parameters in climatic premises such as
5
farms, greenhouses, drying sheds, cold rooms, etc.
5
with 8 analogical inputs (for sensors) and 2 digital ones
(to condition working), plus 8 analogical outlets of relay
5
(all/nothing) expandable, and 3 or 8 analogical,
5
according to model,
5
programmes of control.
6
7
As it is configurable, we can control sensors of
7
temperature,
8
lightness, solar radiation, levels, etc.; and act on
8
numerous windows, fans, heaters, cooling systems,
10
humidifiers, irrigations, alarms, lighting, engines, etc.
11
12
Every one of the controls is configurable in its
12
inputs, outlets, type of working, conditioners, values of
13
reference, differentials, alarms, etc.
13
14
The references can be programmed by hand
15
(being possible to modify them personally whenever it
23
is necessary) or following some curves prefixed by the
23
user himself once and which are being modified
automatically as time goes by, according to what is
set.
The use of prefixed curves of behaving gives big
nimbleness to those controls in which the references
must be changed periodically.
All the records, anomalies, values and other
information useful for the control are registered in the
memory of the system, being possible to see them on
screen.
WARRANTY
AMBITROL 100 enjoys a WARRANY of two
years against any manufacturing fault.
OPTIONS
Model
102/103
is
(outlets 0/10 V), with ten
relative
humidity,
harmful
1
a
complete
gases,
Advertisement
Related Manuals for Progres AMBITROL 100
Summary of Contents for Progres AMBITROL 100
- Page 1 However, if after reading this you still have any doubts, contact us and we will happily answer them. WARRANTY AMBITROL 100 enjoys a WARRANY of two years against any manufacturing fault. OPTIONS...
- Page 2 • Possibility of having 16 outlets of relay. • Possibility of having 8 analogical outlets (Model 103). It has also got a k eyboard with fourteen keys • Version without box, ready to fit in other which are used to acced to the equipment. cabinets.
-
Page 3: F5: Configuration
TYPE-01 Programmes Input of sensors, outlet by relay. Curves When the value of the sensor is lower than the value of reference, the outlet is activated until it Record overcomes it and reaches the value of the differential. Examples: Heating, Humidification, etc. Anomalies TYPE-02 Configuration... - Page 4 Input of sensors, outlet by relay with modulation When the value of the sensor is higher than the of the working time proportional to the changes of the reference, t h e outlet increases proportionally from the sensors. minimum to the maximum, obtaining this last one when programme given reference,...
- Page 5 4. INSTALLATION line, and the two supply lines are filtered towards the earth terminal. Do not increase the value of the fuse (0.4 A) as 4.1. PLACING THE EQUIPMENT this would suppose the destruction of components. On the backside of the cover for the connection housing The equipment is provided in a hermetically there are some spare fuses stuck.
- Page 6 TERMINAL 17:Outlet supply sensors - 17 V positive stabilizing. In the AMBITROL equipments with analogical TERMINAL 18:Outlet supply sensors - 18 V outlets of 0 to 10 V, it is necessary to protect these negative without stabilizing. outlets with screened cable. What is more, this cable TERMINAL 19:Outlet of relay nº8 - Normally must never be installed by the power lines.
-
Page 7: Table Of Contents
To do so, press the "FUN" key and choose Example: Tare = 03.5% HR 76.3 option which shows MENU If the correct value, according to the pattern, CONFIGURATION. was 75.0% HR, compared with the value of the reading (76.3) there is a difference of minus 01.3%, which has to be deducted from the value of the tare Configuration (3.5 - 1.3 = 2.2%) resulting as follows: Tare =02.2% Hr... -
Page 8: Configu.:programmes
inputs and outlets before, as they are related to the programme. 5.2. OUTLETS First, we can see the following screen asking for the number of PROGRAMME we want to access, give number "ENTER". equipment CONFIGU.:Programmes= capacity for 10 programmes. Inputs=2 Outlets= Num. - Page 9 Outlet at 75 % In the question of "inputs", if the number of Limits at 25 % sensor is not entered, the programme will not go on to Limits at 50 % the next question. Deducts the % of the programme, One sound can be read by several programmes.
- Page 10 6. USE types of o utlet by relay (types 1-2-6, except type 3,7,8 and 9). 6.1. PROGRAMMES VENT-1 C1pos=018 To acced to every one of the programmes of Differential= 00.5 ºC values (not of Configuration) press the key "FUN" and choose option 1, then it will ask the number of This value is added or deducted, according to programme.
- Page 11 The programmes with analogical outlet or of proportional action are started when the outlet is over A "1" starts the outlet and a "0" deactivates it, 60% and stop when it decreases below 40% this happens indefinitely in all the types, as long as we do not answer "NO"...
- Page 12 Here we can see a simple example. Manual (Yes/No)= No HEAT-1 C1 Point1 The reference is the value at which it will start to Pos=003 Ref= 29.8 ºC open when the value of the sensor is superior to this one. Pos=008 Ref= 27.5 ºC It will close when the value of the sensor is...
- Page 13 6.5. VARIOUS When it asks for the number of programme, enter "11" for the input 1 and "12" for the input 2. To acced to VARIOUS, press key "FUN" and The first value shown corresponds to the choose option 6 and it will show a MENU OF accumulated from today.
- Page 14 has reached the maximum or minimum programmed The first screen that is displayed when we press value. the key "CON", informs about the time and date. It also indicates the quantity of anomalies that have taken place or if the equipment is at STOP. Mon.
- Page 15 7. DETAILED DESCRIPTION OF THE TYPES VALUE OF SENSOR High alarm 20.0 TYPE 1 DIFFERENTIAL 15.0 Input of sensors, outlet by relay. When the value of the sensor is lower than the REFERENCE 10.0 value of reference, the outlet is activated until it overcomes it and reaches the value of the differential.
- Page 16 Timing programme, outlet by relay. TYPE 2 When the day and time programmed are reached, the outlet is activated, finishing when there is Input of sensors, outlet by relay. no more time of activation left. Up to 99 periodical When the value of the sensor is higher than the activations can be programmed, at the same time.
- Page 17 SENSOR 12.5 TYPE 4 REFERENCE Input of sensors, analogical outlet (0-10 V). The 10.0 PROPORTIONAL BAND programme is given a reference, a proportional band and a maximum and minimum percentage of outlet. Low alarm When the value of the sensor is lower than the reference, the outlet increases proportionally from the minimum to the maximum, obtaining this last one when the sensor reaches the value of...
- Page 18 TYPE 5 enter the number to which the powermeter is connected to. At unit of measure answer with 4. Input of sensors, analogical outlet (0-10 V). The Next it will ask for the minimum value of tension programme is given a reference, a proportional band that the powermeter gives when the window is closed;...
-
Page 19: Num. Of Input=8
TYPE 6 High alarm 20.0 Input of sensors, outlet by two relays (open - close). REFERENCE Special type to work on windows with lathe so 15.0 that the natural ventilation can be made. DIFFERENTIAL When the temperature is higher than the 10.0 reference, some timings are made, one of stop and another of opening. - Page 20 Conditioning Pro.= 00 TYPE 7 Affects in code= 00 Input of sensors, outlet by relay with modulation RECORD of the working time proportional to the changes of the sensors. HEAT-1 21/06 (047%) programme given reference, 22.1 21.2 19.7 ºC proportional band and a maximum and minimum percentage of outlet.
- Page 21 TYPE 8 Affects i code= 00 Input of sensors, outlet by relay with modulation RECORD of the time of activation proportional to the changes of the sensors. VENT-1 21/06 (083%) programme given reference, 24.9 23.4 22.4 ºC proportional band and a maximum and minimum percentage of outlet.
- Page 22 TYPE 9 Input of sensors, outlet by relays, for placing proportionally windows, hatches, etc, with an outlet for opening and another one for closing. programme given reference, proportional band and a percentage of maximum and minimum outlet, and by an input of retromessage, it will be placed proportionally to the variations of the sensors.
- Page 23 8. AMBITROL 100H 9. AMBITROL 100HS SPECIAL VERSION FOR SECUENCIAL OPTIONAL VERSION FOR SEQUENTIAL HUMIDIFICATION MOISTENING WINDOW REGULATION BY OPENING TIMES. This version can do the humidification of different rooms greenhouses, activating electrovalves sequentially one after the other with just •...