Advertisement
When it asks for the number of programme,
enter "11" for the input 1 and "12" for the input 2.
The first value shown corresponds to the
accumulated from today. To see the six previous days,
press the key with the arrow.
The data are not updated while you are seeing
the record of counting.
Counter 1= 00001
6.4. ANOMALIES
The anomalies is a record of the incidences that
have taken place and have affected the correct
working of what it is controlled.
To enter in anomalies, press the key "FUN" and
choose option 4, then it will show the first anomaly, if
there is any.
F3:
Record
F4:
Anomalies
The maximum number of anomalies registered
is 15, if there are more than 15 it will cancel the oldest
one.
At the right upper line of every anomaly it shows
the text "E.y/n" (Erase? yes or no). If you press "YES"
it erases it and goes to the next one, not to erase this
one press "NO". On reaching the last anomaly it goes
back to Functions.
Here is a list of the different anomalies:
- Electric supply failure: If there is an electric
supply failure which is longer than a minute and
shorter than 24 hours, it will be registered as follows.
Electric cut.
15/04 from 21:34 to 23:17
-Without battery: If there is a disconnection of
the equipment superior to four days the memory of the
record
and
of
anomalies may be erased. The
configuration, the programmes and the curves are not
erased.
Without battery
27/03
- Alarm in programme: Any programme to which
we have given
values in high or low alarm and the
value of the sensor is superior to these ones, for at
least thirty seconds, the outlet of alarm will be
activated and the anomaly will be registered.
Alarm in P03
27/03
23/04
E. Y/n
E.y/n
E. Y/n
15:06
6.5. VARIOUS
To acced to VARIOUS, press key "FUN" and
choose option 6 and it will show a MENU OF
VARIOUS.
F5:
Configuration
F4:
Various
VARIOUS: Alarm=1
Clock=2
6.5.1. ALARM
Choosing option "1", we can inhibit the outlet of
the alarm, both when it is working or not, to use it and
in this way, use the outlet as a normal one.
Alarm (Yes/No)= Yes
If we answer with "Yes" it will ask if we want that
the outlet of alarm is normally closed. If we answer
"Yes", the start will be closed until there is an alarm or
an electric cut.
Alarm (Yes/No)= Yes
Normal. Closed= No
6.5.2. CLOCK
Choosing option "2" we can set the time in the
internal clock.
Thur.15:26 14/06/00
-Set time-
6.5.3. STOP
With the option "3" we can set the equipment at
STOP,
which
means
disactivated.
In STOP (Yes/No)= No
6.6. CONSULT
The option of CONSULT is used to examine, in
a simple way, the state of the inputs and outlets of
every programme.
To enter this section, press the key "CON".
From nowonwards the key with arrow or with CON
move the programmes on the screen.
To have direct access to the consult of a
programme, enter its number. The programme 10 is
the key "0".
Stop=3
that
all
the
outlets
13
are
Advertisement
