1. Manuals
  2. Brands
  3. Progres Manuals
  4. Controller
  5. Agronic
  6. Instruction manual

Progres Agronic Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INDEX
Sec.
1.
2.
3.
3.1.
3.2.
3.3.
3.4.
4.
5.
5.1
5.2
5.3
5.4
5.5.
5.6.
PRESENTATION
We wish to take this opportunity to thank you for
the confidence in us which you have demonstrated in
expressing interest or acquiring the Agrónic Filters.
This confidence, for our part, stimulates our
efforts to meet and surpass the expectations of our
clients to justify the traditional quality of our products.
This manual will explain the specification of the
equipment as well as its installation and use.
However, if after reading this you still have any
doubts, contact us and we will happily answer them.
INSTRUCTION
MANUAL
THEME
VERSION 2

1. BASIC FUNCTIONAL DESCRIPTION

Page
of filter batteries with different possibilities of starting
1
and working.
3
3
There are 3 different models according to the
3
number of filters to control: for 6, 12 and 18 filters.
4
Models for 6 and 12 filters can be increased whenever
5
necessary, up to 18, sending them back to the factory.
6
Filter cleaning can be started by:
7
8
a) By a "drop in pressure": Working whenever
8
the controller receives a signal from the differential
8
pressure gauge which controls the drop in pressure
8
between the input and outlet of the filters, as a
9
consequence of the dirt accumulated in them.
9
b) By "volume": Working every certain volume of
9
filtered water. In this case, the controller must receive
signals from a volumetric impulse transmitter.
c) By "time": Working every certain time of water
circulation through the filters (in this way, the
controller needs to receive the corresponding external
signal).
d) By a combination of the "drop in pressure"
with the "filtered volume" or the " time that has gone
by" and in this way a minimum periodical cleaning is
guaranteed, if it has not been necessary
before, due to an unexpected accumulation of dirt.
Once the cleaning order has been detected, the
different connected filters will be activated sequentially
(one after the other) by the controller. The duration of
the cleaning of every filter can be programmed
independently.
is a controller for the automatic cleaning
1
to do it

Advertisement

Table of Contents
loading

Related Manuals for Progres Agronic

Summary of Contents for Progres Agronic

  • Page 1: Table Of Contents

    INSTRUCTION MANUAL VERSION 2 INDEX 1. BASIC FUNCTIONAL DESCRIPTION is a controller for the automatic cleaning Sec. THEME Page of filter batteries with different possibilities of starting BASIC FUNCTIONAL DESCRIPTION and working. DIMENSIONS INSTALLATION There are 3 different models according to the 3.1.
  • Page 2 There is a timing which affects all filters equally: - For the detection of breakdowns in the the pause between filters. This timing is important to installation, recover pressures in the net and avoid overlapping in - For different options. the hydraulic valves.

  • Page 3: Dimensions

    2. DIMENSIONS 3. INSTALLATION grommets at the cable outlets, which are provided with the equipment. For the wall mounting of the unit, there are two 3.1. PLACING THE UNIT holed pieces in the upper corners. There are also two more holes in the inside of the connection housing. Place the unit at the right position and height.

  • Page 4: Connection

    3.2. CONNECTION The input is also protected with a fuse and a varistor. To replace the fuse, half turn the fuse cover and The unit has to be installed following the insert another of the same value. prevailing regulations for electrical installations. In the “mounting box”...

  • Page 5: Guide To Malfunctions

    Outlet assignation tables according to unit models. Model Outlets Input 220V, outlets 24V Input 12V, outlets 12V Input 12V, outlets 12V Latch option 3 cables Box terminal, connected to earth (build-in model). Stop common Outlet common 24 V. Outlet common 12 V. Start common General valve Filter outlets...

  • Page 6: Enclosed Information For The

    3.4. ENCLOSED INFORMATION FOR THE The order of the sector numbers is not taken into account in the terminals of the diode box. INSTALLATION OF OPTIONS The other cable, normally white, will be connected to the programmer, to the outlet corresponding to its sector or to the “M”...

  • Page 7: Technical Characteristics

    4. TECHNICAL CHARACTERISTICS Power supply Units for alternating current Units for direct current Tension 230 VAC +5% -10% CAT II 12 VDC +10% -5% Frequency 50 - 60 Hz -------- Energy consumption Inferior to 58 VA (at rest 2,7 VA) Inferior to 7 W (at rest 0,6 W) Fuses Input...

  • Page 8: Use

    5. USE It is important to configure the unit after connecting it for the first time. 5.1. FUNCTIONS There are four functions which can be accessed (...)=(min),( m3),(seg). CONFIGURATION:(...) with the “FUN” key. Every time this key is pressed, two Number of filters=00 out of the four functions will be displayed and the chosen function is reached by pressing from number...

  • Page 9: Manual

    5.4. MANUAL 5.6. CONSULTATION The MANUAL function is divided into three On pressing the “CON” key the following screen different options: will be displayed. The first screen shows the number of the filter, 1.- Cleaning: On pressing 1 and ENTER, the which is being cleaned, and whether it is at pause cleaning sequence will be activated or it will be ended between filters.
  • Page 10 R-910-1...

Table of Contents