Operation - Sharp Plasmacluster FP-JM40E Operation Manual

OPERATION

START / STOP
START
HAZE
The main unit operates at HIGH fan speed for 60 minutes and then alternates between Low and High
level for 20 minutes each.
FAN SPEED
AUTO SLEEP
OFF TIMER
Select the length of time you want, with the main unit on. The main unit automatically stops once the
selected time is reached.
(with the main unit ON)
STOP
10 minutes: Max High fan level
50 minutes: High fan level
20 minutes: Low fan level
20 minutes: High fan level
NOTE
AUTO
The fan speed is automatically controlled depending on the
3 detection. (Dust /Odor /Light)
SLEEP
The main unit will operate very quietly, and the fan speed
is automatically switched depending on the amount of
impurities in the air and room brightness.
Cleanliness Monitor/Plasmacluster Ion Light go off and the
UV Light becomes dark automatically.
MED MAX
Even though the indicator is off, Plasmacluster Ion is
dispersed into air unless Plasmacluster Ion is turned off
by
2h 4h
2hour 4hour
• When the main unit starts operation, the
operation starts in the previous mode it was
operated in.
NOTE
• The Plasmacluster Ion can not be turned
"OFF".
• It is possible to switch this mode to another
while operating.
However, the HAZE mode will not function
after switching mode.
.
8h OFF
8hour CANCELLATION
EN-8