Sharp Plasmacluster FP-JM40E Operation Manual page 11

MOSQUITO CATCHER
Use this function when there is concern about mosquitoes.
UV Light ON
NOTE
• When SHEET RESET Light is turned on, please replace the Glue Sheet with a new one.
• Select MAX mode to catch mosquito more effectively.
The higher the air volume is, the easier it is to capture a mosquito.
• If Catch Panel comes off, MOSQUITO CATCHER Light and UV Light are turned off automatically.
Please check the Catch Panel is properly attached.
• We recommend you to keep this air purifier working for 24 hours to maximize its function except for
exchanging filter and Glue Sheet.
PLASMACLUSTER ION ON/OFF
When Plasmacluster Ion is ON, the Plasmacluster Ion Light will turn on. (blue)
(with the main unit ON)
ON
more than
3 sec.
ADJUSTMENT OF SENSOR DETECTION SENSITIVITY
You can change the sensitivity of the Dust sensor / Odor sensor and the Light sensor .
1
(with the main unit OFF)
more than
3 sec.
2
Dust sensor / Odor sensor
3
UV Light OFF
OFF
Standard High Low
NOTE
• If the power OFF Button is not pushed within 8 seconds of
adjusting sensor sensitivity, the setting will be saved automatically.
• The sensor sensitivity setting will be saved even if the main unit is
unplugged.
NOTE
• When the main unit starts operation,
the operation starts in the previous
mode it was operated in.
more than
3 sec.
Light sensor
EN-9
4h 8h 2h
High Low
Standard