Operation - Sharp KI-L80TA Operation Manual

OPERATION

START/STOP
START
♪
NOTE
• When the product starts operation, the
operation starts in the previous mode it was
operated in.
SHARP COCORO AIR
MODE
When the product is connected to Sharp
Cloud*
Sharp Cloud will analyze and set the optimal
operation for your room based on the information
retrieved from sensors on the product and your
usage records.
* For details on how to connect Sharp Cloud, refer
to the Wireless LAN Guide Book.
When the product is not connected to
Sharp Cloud
The fan speed and the humidification ON / OFF
are automatically controlled depending on the six
detection. (PM2.5 / Usual dust / Odor / Temperature
/ Humidity / Light)
NOTE
• If touch the Humidify ON/OFF Button, the
operation mode will change to
STOP
♪
～
♪
(AUTO).
EN-8
SELECT AIR VOLUME
AND MODE
♪ ♪ ♪
AUTO POLLEN SLEEP LOW
AUTO:
The fan speed is automatically switched depending
on the amount of impurities in the air.
You can select humidification ON / OFF.
POLLEN:
The Sensitive Dust Sensor sensitivity is
automatically increased and quickly detects
impurities such as dust and pollen and clean the air
powerfully.
SLEEP:
The product will operate quietly, and the fan speed
is automatically switched depending on the amount
of impurities in the air.
When the Light Control is set to "Auto", Front Display
and Cleanliness Indicator automatically go off. (Page
10, 11)
HUMIDIFICATION
SETTING
ON
♪
NOTE
• When operating with humidification ON in
the modes in the table below, the product
automatically controls humidity by sensing
temperature and humidity. (Except MAX / MED
/ LOW mode.)
Temperature
(Except MAX / MED /
LOW / SLEEP)
- 18 ºC
18 ºC - 24 ºC
24 ºC - 28 ºC
28 ºC -
♪ ♪ ♪ ♪
MED MAX
OFF
♪ ♪
Humidity
ALL MODE
SLEEP
MODE
65 % 65 %
60 % 65 %
55 % 60 %
45 % 50 %